Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a wide fit in a light fabric with a comfortable feel and good tear resistance.
Tool holder belt loops in waist. HTFR Dobby reinforced tool pockets with tool strips. Side pockets. Back pockets with pocket flaps. Right cargo pocket with flap, ruler pocket, separate mobile phone pocket, pencil holder and concealed knife button with loop. Left cargo pocket with flap and concealed D-ring, ruler pocket, first aid pocket and concealed knife button with loop. Shaped knees with kneepad pockets in HTFR Dobby. Back hem in HTFR Dobby. Adjustable foot width with press studs. Contrast stitching. Special order – please allow an additional 5 days approximately.
Product information
Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and a wide fit in a light fabric with a comfortable feel and good tear resistance.
Tool holder belt loops in waist. HTFR Dobby reinforced tool pockets with tool strips. Side pockets. Back pockets with pocket flaps. Right cargo pocket with flap, ruler pocket, separate mobile phone pocket, pencil holder and concealed knife button with loop. Left cargo pocket with flap and concealed D-ring, ruler pocket, first aid pocket and concealed knife button with loop. Shaped knees with kneepad pockets in HTFR Dobby. Back hem in HTFR Dobby. Adjustable foot width with press studs. Contrast stitching. Special order – please allow an additional 5 days approximately.
Quality
804: Reinforcing fabric, HTFR Dobby, 295 g/m²
811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 CL.1, EN 13034, LOI: 29,8%
Washing instructions
Certifications
The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
EN ISO 11612 A1+A2 B1 C1 F1EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
IEC 61482-2 APC 1
EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.
ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
EN ISO 20471 CL.2EN ISO 20471 - The standard specifies high visibility clothing used in trafficier environments or in other environments where extra visibility is required. Supersedes EN 471.
EN ISO 15797 50 WASHESEN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.
TRANEMO SKINSAFETRANEMO SKINSAFE - Multi-layer system designed to protect against flame, heat and Electric Arc injuries.
