Flame Retardant Jacket

SKU
603081
- Tera TX
  •  
     
  • EN ISO 11612
    A1+A2 B1 C1 E1 F1
  • EN 61482-2
    APC 1
    ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
  • EN 1149-5
  • *EN ISO 11611
    CL.1 A1+A2
  • EN 13034
    type PB[6]
  • EN ISO 15797
    50 WASHES
  • TRANEMO SKINSAFE

Non-Metal and Inherent Flame Retardant jacket with increased visibility in a light fabric with a comfortable feel and good tear resistance. PFAS-free¹.

Concealed front zip and press studs. Extended back. Two loops for communication equipment. Chest pockets with flaps. Sleeve pocket with flap, hidden D-ring and strap for ID-pocket. Side pockets with flaps. Two inside pockets with flaps. Inside mobile phone pocket. Draw cord at the bottom of the jacket. Adjustable cuffs. Reflective stripes on shoulders and sleeves. *If the garment is mainly intended for welding processes, please ask Tranemo for usage advice. ¹This garment is produced with new PFAS-free fabrics. For a period, we will have a mixed stock and the transition to PFAS-free will be a running replacement.

Size
XS-4XL

Product information

Quality

811: Tera TX - 45% modacrylic / 35% cotton / 18% polyamide / 2% antistatic, 260 g/m²
Inherent Flame Retardant fabric with pleasant feel. Extra reinforced yarn gives good tear resistance despite low weight. To maintain chemical protection (EN 13034), the protective clothing must be re-impregnated after washing.
Test result fabric
EN ISO 11612 A1+A2 B1 C1 E1 F1
EN ISO 11611 classe 1
EN 61482-1-2:2014 APC 1
EN IEC 61482-1-1:2019, ELIM: 8.1 cal/cm², EBT: 8.7 cal/cm²
NFPA 70E, ASTM F1506
LOI 29.8%
EN 1149-3
EN 13034
EN ISO 20471 for fluorescent colours

Washing instructions

Certifications

  •  
     
    The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
  • EN ISO 11612
    A1+A2 B1 C1 E1 F1
    EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
  • EN 61482-2
    APC 1

    EN 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.

    ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²
  • EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
  • *EN ISO 11611
    CL.1 A1+A2
    EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
  • EN 13034
    type PB[6]
    EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.
  • EN ISO 15797
    50 WASHES
    EN ISO 15797 - The standard specifies procedures for industry laundry and finishing of workwear.
  • TRANEMO SKINSAFETRANEMO SKINSAFE - Multi-layer system designed to protect against flame, heat and Electric Arc injuries.