Welding trousers with tool pockets

SKU
555086
- Outback HW
  •  
  • EN ISO 11612
    A1+A2 B1 C1 F1
  • IEC 61482-2
    CL.2
    ARC RATING: 12,3 cal/cm²
  • EN 1149-5
  • *EN ISO 11611
    CL.2 A1+A2
  • *EN 13034
    type PB[6]

Welding trousers with nail pockets and increased visibility in a very comfortable fabric with extremely good welding properties and protection against radiant heat and metal splashes.

Tool pockets with tool strips. Side pockets. Thigh pocket with flaps. Shaped knees with adjustable inside kneepad pockets. Hip pockets with flaps. Ruler pocket with adjustable opening. Fluorescent fabric on legs. Reinforcement fabric on leg hem. Special order – please allow an additional 5 days approximately. *To meet the requirements for EN ISO 11611 and EN 13034, openings of the nail pockets must be covered by the jacket 5535 during welding.

Size
30"- 50"R, 32"- 40"T, 34"- 48"S

Product information

Welding trousers with nail pockets and increased visibility in a very comfortable fabric with extremely good welding properties and protection against radiant heat and metal splashes.

Tool pockets with tool strips. Side pockets. Thigh pocket with flaps. Shaped knees with adjustable inside kneepad pockets. Hip pockets with flaps. Ruler pocket with adjustable opening. Fluorescent fabric on legs. Reinforcement fabric on leg hem. Special order – please allow an additional 5 days approximately. *To meet the requirements for EN ISO 11611 and EN 13034, openings of the nail pockets must be covered by the jacket 5535 during welding.

Quality

803: Fluorescent, Barricader EP, 545 g/m², EN ISO 20471
804: Reinforcing fabric, HTFR Dobby, 295 g/m²
863: Outback HW, 425 g/m², EN ISO 11612 E3, EN 61482-1-2, Arc Rating: 12,3 cal/cm², LOI: 28,9%

Washing instructions

Certifications

  •  The CE marking indicates that the product is type examined according to the Regulation (EU) 2016/425.
  • EN ISO 11612
    A1+A2 B1 C1 F1
    EN ISO 11612 - The standard specifies protective clothing to protect against heat and flame.
  • IEC 61482-2
    CL.2

    IEC 61482-2 - The standard specifies protective clothing that protects against the thermal hazard of an electric arc.

    ARC RATING: 12,3 cal/cm²
  • EN 1149-5EN 1149-5 - The standard specifies protective clothing used in explosive environments (ATEX).
  • *EN ISO 11611
    CL.2 A1+A2
    EN ISO 11611 - The standard specifies protective clothing used in welding or allied processes.
  • *EN 13034
    type PB[6]
    EN 13034 - The standard specifies protective clothing that protects against liquid chemicals.